Welcome to the official website of Qinyang Xinghui New Materials Co., Ltd!
Production process of carbon brick
Keywords: anti-corrosion carbon bricks
Release time:
2025-01-02 11:50
Source:
The production process of carbon bricks is roughly similar to other refractory bricks, but it is necessary to prevent carbon oxidation at high temperatures, so the roasting of raw materials and the firing of products must be carried out in a reducing atmosphere. Anthracite should be finely roasted before use to eliminate volatile matter, sulfur, and moisture, and to enhance its volume stability, mechanical strength, and antioxidant properties. Coke should be dried first to avoid difficulties in forming due to high moisture content and cracking of the product during the firing process. Asphalt should be melted and dehydrated first, so that its moisture content is less than 0.2%, and the dehydration temperature should be 120-160 ℃.
The carbon brick ingredient is made of roasted granular anthracite as the aggregate, and its particle size depends on the size of the product: large bricks are 8-12 millimeters, and small bricks are 4-6 millimeters. The amount of anthracite added is about 60%. Coke should be added as fine powder, with a content of about 70% for particles smaller than 88 microns. The amount of binder added to blast furnace carbon bricks is usually 15-20%. In order to prevent oxidation, bricks are generally filled with coke powder or coal powder as protective fillers during firing. The firing temperature is 1300-1450 ℃, the insulation time is about 20 hours, and the total firing time is about 240-420 hours. When cooled to 40-60 ℃, it is discharged from the kiln. Carbon bricks are prone to catching fire and burning when fired at high temperatures.
Xinghui New Materials produces acid resistant and anti-corrosion carbon bricks using a unique process. The graphite carbon bricks/carbon plates are made of high-quality graphite carbon materials, with the addition of highly acid resistant organic composites. They are refined through high-pressure molding, vacuum impregnation, and high-temperature heat treatment processes, and have extraordinary acid and temperature resistance. They are ideal lining materials for chemical phosphoric acid reaction tanks, phosphoric acid storage tanks, and other equipment; Our company has formed a one-stop operation pattern and service system for scientific research and design, production and sales, and on-site construction. Can produce according to user requirements and fully meet customer demands. Welcome new and old customers to call or write to discuss cooperation matters.
Previous page
Next page
News
Contact Us
Tel：+86-13839100811
Email：qyszhmy@163.com
Email：qyszhmyo1@163.com
Add：No. 008 Qinji Road, Wangqu Township, Qinyang City, Jiaozuo City, Henan Province
Our products
Our company has strong technical strength, advanced equipment production process, complete testing facilities, scientific management methods, stable and reliable product quality, and enjoys a high reputation in China.
Follow us
Copyright © 2023 Qinyang Xinghui New Materials Co., Ltd This website supports IPV6
Powered by www.300.cn SEO